An unusual but attractive combination of semi riven black Slate with white Marble inserts had been installed in the hallway of this residence in the town of Southport. This floor had not been cleaned properly in some time, in fact the local Tile Shop had given the customer the incorrect tile cleaning product for the job which had slowly stripped the sealer off the tile leading to dirt becoming ingrained into the tile and making it difficult to clean which resulted in the deteriorated condition you see on the picture below:
Cleaning Black Slate and Marble Inserts
The remedy was to give the floor a good deep clean and then reseal so I got to work and applied a medium dilution of Tile Doctor Pro-Clean onto the floor leaving it to soak in for fifteen minutes before working it in with a black scrubbing pad fitted to a rotary buffing machine. This process soon had the dirt running out of the floor and the soiled solution was removed using a wet vacuum. The process was repeated for stubborn area and this time the grout was scrubbed by hand using a stiff brush and more Pro-Clean. Pro-Clean is a multi-purpose alkaline based cleaning product that’s safe to use on Tile, Stone and Grout and given there was hardly any sealer left it wasn’t necessary to use a stronger dilution.
Once I was happy with the floor it was washed down with more water to remove any trace of cleaning products and then the water removed using the wet vacuum and then left to dry overnight.
Sealing Black Slate and Marble Inserts
We have a number of sealing products suitable for Slate and Marble each one with a different effect but given then floor was predominately slate I decided opt for four coats of Tile Doctor Seal and Go which provides stain protection and leaves a nice low sheen finish.