Customer had these Dennis Ruabon Quarry Tiles fitted over 20 years ago in the WC of his house in Low Bentham, various cleaning and sealing products have been used since however this left a build-up of contamination on the Tiles which was detrimental to their aesthetic appeal and also left a noticeable residue smell.
Cleaning Quarry Tiles
To clean the Tiles and strip off previous sealing coatings we used Tile Doctor Pro-clean diluted 1 to 10 with warm water. This was left to dwell on the floor for a while before being worked into the tile using and black buffer pad fitted to a rotary buffing machine. The whole area was cleaned in this manner along with a stiff hand brush to get into the grout lines and a wet vacuum which was used to suck up the dirty residue before the floor was rinsed down with cold water. The wet vacuum was used again to remove the water, one tile was loose so this was re-fixed and the floor left to dry.
Sealing Quarry Tiles
Once the floor was fully dry we applied two coats of Tile Doctor Colour Grow which will protect it going forward and also helps to bring out the colour in the tile whilst maintaining a more natural appearance. There were some stubborn stains and discolouration on the tiles that could not be treated however I think you will agree it is much improved and you will have to take my word for this but it also smells better
Before leaving we left the customer with a bottle of Tile Doctor Neutral cleaner, this product is recommended for sealed floors due to its very low PH formula; there are a number of acidic floor cleaning products available which should not be used with stone or sealed floors as the acid will eat into the seal or stone surface over time reducing its life.