We were recently asked to look at a polished Marble Tile installed in the floor of a house in Kendal, Cumbria. They were recently fitted but the local Tiler had struggled to get the sheen right on the surface of the Marble, in fact the sealer he had used was badly smeared in some places and needed to come off.
To strip off the sealer we used with a Red diamond encrusted burnishing pad fitted to a rotary machine and then rinsed the floor with water which we then removed using a wet and dry Vax machine. We then used other pads in the burnishing system process to clean and polish the Marble floor until we had a nice overall sheen. We finished off the floor with a coat of Tile Doctor Ultra-Seal, which is a premium, no-sheen, natural-look penetrating sealer formulated to provide maximum stain protection.