We often get calls to refresh bathrooms, which by the way if your selling your house is highly recommended as its cheap to do and it can transform a dingy bathroom into one that looks like it has just been installed; so replacing the silicone sealant strip around sinks and baths is something we tend to do a lot of and if you have ever done this yourself you will probably realise how tricky it can be.
This customer in Garstang only needed the strip around the sink replacing which isn’t a large job so I agreed to pop-in on the way back from another job in the local area and sort it out. The process is relatively simple, you use a sharp knife to remove the old sealant, clean the area up and then apply new, the trick is to apply just the right amount of silicone and then shape it with an angled tool. My preference is to use a Mapei silicone which if you live in Garstang can be sourced from Rockform tiles.
On the subject of bathroom maintenance I can highly recommend a product we sell called Tile Doctor Mould Away which used regularly does a great job of keeping your Silicone mould free.
Bathroom Refresh in Garstang
Grout Colouring a Ceramic Floor in Lancaster
Here are some details of a small 4m2 Tile Cleaning and Grout Colouring job we did in a shower room in Lancaster. The tiles were recently laid and unfortunately the 5mm wide grout had discoloured because the tiler had used the same bucket to mix the adhesive with and some of the remnants from that had got into the grout mix. If the tiler had used a separate bucket this wouldn’t have happened. The tiler didn’t know what to do to rectify the problem so Tile Doctor got the call. He had done a good job on the rest of the bathroom and the customer didn’t want to upset him over it any further so she was quite happy to pay me to sort the problem out, as long as it didn’t look false.
Before Grout Colouring
First I cleaned the grout with the pre-treater spray that comes with the kit and washed off the excess with water. Although the directions recommend leaving the grout to dry for 2 hours I left it for 30 minutes followed by a blast from my heat gun to dry any dark wet spots, this speeds up the process immensely.
Applying the Grout Colouring
Next I applied the Grout Colourant, fortunately the tiles were ceramic and the excess grout colourant came off the tiles very easily where I had got some on by accident. The kit came with a special white abrasive cloth which is excellent at removing excess grout colourant from the tiles. I often find unglazed tiles or stone and even some porcelain tiles are slightly porous on the surface and if the grout colourant gets on to these tiles then it can be quite hard to get off. I find it’s always best to do a test first on a couple of rows, if you get any on the tiles, don’t leave it on for more than 10 to 15 minutes as it sets very hard. Porous stones should always be sealed beforehand as it will make them a lot easier to clean. Its worth noting that the Grout Colourant acts as a barrier and so will never need to be sealed, it’s also completely washable.
Tiled Ceramic Floor after Grout Colouring
Grout Colouring a Ceramic Tiled Bathroom floor in Lancaster