Photographs below from the maintenance of Amtico Vinyl Floor Tiles in the kitchen of a house in the village of Heysham which is famous for its ferry port that has links to the Isle of Man and Ireland. This Vinyl wasn’t that dirty but it was starting to lose its sheen and when this happens it’s an indication that the sealer has started to wear down leaving it looking patchy in the high traffic areas. Once the sealer has failed then dirt will start to accumulate making it look less appealing, so my customer decided to call Tile Doctor in before it got to that point.
It wasn’t a big area and unlike a clay or Stone tile, Vinyl is a lot less porous and can be cleaned and sealed within the same day rather than leave it do dry overnight or even longer. This means less hassle for the customer and a better price for doing the work as well. As a guideline, a 10m2 floor area usually takes around two to three hours to deep clean and re-seal, naturally the larger the area the longer it takes.
Deep Cleaning Amtico Vinyl Floor Tiles
We started with a deep cleaning product developed for Tile Doctor called Vinyl strip which as well as leaving a pleasant floral aroma is biodegradable and phosphate free. You dilute the concentrate with ten parts of water to 1 part Vinyl Strip or if you prefer a litre of water to 100ml of product. This was mixed together in a clear container and then applied to the area to be cleaned. It’s left to soak into the floor for a while so it can break down any remaining old sealer and dirt and then scrubbed in using a deck brush.
I find a wet vacuum machine invaluable at this point at this junction, mopping is okay but you really need to make sure all the product is extracted off the surface to be sealed otherwise it will do to the new sealer what it has done to the old. We call this process Neutralisation and a good rinse with fresh water also helps as does having an industrial air mover in place to help speed dry the floor.
Sealing Amtico Vinyl Floor Tiles
You can’t seal the Vinyl until the tiles are dry as dampness can cloud the sealer so if you don’t have an air blower we recommend leaving the floor for six to eight hours. Our air mover is quite large and it soon had the floor dry so we could move onto sealing quite quickly and applied three coats of Vinyl Shine which gave the floor a nice sheen. Each coat must dry out before the next coat can be applied but it’s worth doing correctly as each coat builds up another layer of protection on the Vinyl, again we used an Air blower to speed up the drying process.
Amtico Vinyl Floor After Care
Once dried we left the customer with a free bottle of Tile Doctor PH Neutral Tile Cleaner for the regular cleaning of the floor. We always recommend this product for the regular cleaning of sealed surfaces as it’s PH neutral and won’t degrade the sealer like most domestic cleaning products you find on supermarket shelves.