We were asked to take a look at these Quarry Tiles at a house in the Lancashire town of Formby near Liverpool. The tiles had been sealed with varnish but a polyurethane sealer like Varnish which forms a thin coat on the surface of the tile is easily scratched as you can see in the photograph below:
Cleaning Quarry Tiles
To resolve the problem we had to strip off the Varnish coating from the Quarry tile using Tile Doctor Remove and Go which is especially designed for the safe removal of coatings from tile and stone. The product is diluted and spread over the floor allowing it to soak into the tile for around fifteen minutes before being scrubbed into the tile using a rotary floor scrubbing machine fitted with a black pad. The soiled solution is then washed off with clean water and extracted from the floor using a wet vacuum. There were some stubborn areas and these were tackled by repeating the process but this time with the addition of a steamer.
A stiff brush was also used in the grout lines and when we were completely satisfied with the condition of the floor it was given an thorough rinse using cold water. The wet vacuum was used again to remove the water and get the floor as dry as possible.
Sealing Quarry Tiles
The floor was left to dry overnight and we came back the next day to seal the floor using four coats of Tile Doctor Seal and Go which will protect it going forward and it also adds a nice shine to the tile.
Details of an original Flagstone Floor cleaning job below from a Victorian House in the City of Lancaster, we often find flagstone floor tiles in kitchens and hallways and in this case they were in the hallway. You can see from the photographs below that the flagstone floor tiles were in a very bad state and it became clear that no amount of cleaning was really going to remove the decades of trapped dirt embedded in the pores of the Sandstone.
Cleaning the Flagstone Floor
To get over this problem it was necessary to remove the top surface of the flagstone using a milling pad together with a small amount of Tile Doctor Pro-Clean. The flagstones were then washed down with water which was then removed using a wet and dry vax machine. There was no damp proof course under the tiles so I left it to dry for a week before coming back to seal.
Sealing and Restoration of Flagstone Floor
The milling process had opened up the pores in the sandstone flagstone floor tile so to seal it I used 1 coat of Tile Doctor Colour Grow in order to bring out the colour in the stone and then topped this off wth a further 3 coats of Tile Doctor Seal and Go.