Uncovered Victorian Floor Tiles Restored

Photographs below from the restoration of Victorian Floor Tiles in the hallway of a house in the town of Garstang near Preston. The owner of the house had discovered the tiled floor during renovations and was keen to repair and restore it as a period feature. The carpet had done a reasonable job of protecting the floor and I have come across floors in much worse condition in the past so we were confident it could be restored.

Cleaning a Victorian Floor Tiles

The floor was stained from carpet adhesives and some cement haze which we managed to remove using Tile Doctor Grout Clean-up which contains concentrated Hydrochloric Acid and solves a number of problems of this nature. Acids can dissolve calcium based stone so you have to be careful what you use it on, my advice is not to leave it too long on any surface and to wash it down afterwards with water.

Victorian Tiled Floor Before Victorian Tiled Floor Before

The next step was to give the floor a thorough clean which we did using Tile Doctor Remove and Go mixed 50/50 with Nanotech Ultra-Clean; a steamer came in really handy at this point for those tricky stubborn areas. Last step was to give the floor a good rinse with water to remove any remaining chemical before sealing, if you’re doing this work yourself I recommend you hire a Wet Vacuum as it makes light work of removing surface water.

Sealing the Victorian Tiled Floor

The last step was to seal the floor however before we could do that it need to be dry so we checked for dampness first using a Damp Meter. When we happy the floor was sufficiently dry with sealed the floor using 4 coats of Tile Doctor Seal and Go which provides a low sheen finish whilst offering excellent stain protection. You have to leave each coat to dry before applying the next.

Victorian Tiled Floor After Clean Victorian Tiled Floor After Clean

To source Victorian tiles similar to these visit www.rockform.co.uk

Restoring a Victorian Tiled Floor

Scroll to Top