Fireplace Cleaning

Welcome to my Work History archive where you will find detailed examples of Fireplace Tile Cleaning and Renovation work carried out in Lancashire.

Cleaning and Renovating Fireplaces and Hearths

Stone Fireplaces typically suffer from smoke staining which we can remove with the use of an alkaline gel cleaner such as Tile Doctor Oxy-Gel which sticks to the surface for longer and is easier to manage than a liquid cleaner. Other problems we typically come across involve hearths stained by Candle Wax and Rust from wrought iron fire baskets.

For Stone Fireplaces and especially Stone Hearths we recommend the application of a Sealer such as Tile Doctor Ultra-Seal which is almost invisible thus protecting the stone without changing its appearance.

Below you will find detailed examples of work we have carried out in the past, it should give you some idea of what’s involved and what can be achieved with the right techniques and products.

Floor Damaged Limestone Fireplace Hearth Before and After Cleaning

Limestone Fireplace Hearths Stained by Flooding Rejuvenated in Morecambe

1 Comment / Fireplace Cleaning, Limestone Tile Cleaning and Polishing, Morecambe Tile Cleaning, Work History /

Morecambe is a large town on Morecambe Bay in Lancashire, and is a tourist hotspot within the region – particularly amongst beach goers during the summer. However, due to its location of being right next to the coast and near to the River Lune, Morecambe is an area which is commonly affected by flash flooding. Just last year there were several episodes of severe flooding.

This flooding has a big impact on houses and businesses – the damage water can cause can come as quite a surprise if you have not experienced it before. I recently visited to a business in Morecambe which had been affected by flooding. The business was, in fact, a fireplace showroom and a pair of the Limestone fireplace hearths on display had been stained by the water.

Floor Damaged Limestone Fireplace Hearth Before Cleaning Floor Damaged Limestone Fireplace Hearth Before Cleaning

We were asked to remove the water marks left by the flooding. One of the hearths has been in use as a test model, with a coal burner installed, and it hadn’t been cleaned properly in some time. As you can imagine, there were more problems than just the water stains to overcome! Both hearths would require a deep clean and fresh seal.

Cleaning Stained and Dirty Limestone Fireplaces

To begin, we applied Tile Doctor Oxy-Gel to the hearths. This product is a specially formulated, alkaline-based degreaser and cleaner. As it comes in a gel form, not a liquid, Oxy Gel can be brushed into vertical surfaces and left to soak, without risk of it either disappearing into the Limestone or, even worse, trickling down the side of the surface. We would not want it coming into contact with the carpet, for instance.

We left the Oxy-Gel to dwell for a short period on one hearth while we worked on the other, applying the same treatment. After around twenty-five minutes we rinsed off the gel with clean water and then extracted any excess moisture with the use of a wet vacuum.

This process did a good job of cleaning the Limestone, but more work was required to restore its appearance, so the hearths were polished using a set of diamond encrusted hand held burnishing blocks. We started with the coarsest block (50 grit) and rubbed the stone with a bit of added water as lubrication, before wet vacuuming away the excess residue. This process was then repeated with progressively finer blocks (100, 200 and 400 grit), and the hearths were given a final rinse with fresh water.

There were some odd ring marks on one of the Limestone hearths that we couldn’t remove. Thankfully, the owner put our minds to rest on this problem, as he said they were there when he initially purchased the stone over 20 years ago. They had been covered with dirt ever since and the customer was surprised, but not shocked, to see them again. I suspect that these marks were caused by the natural mineral deposits within the stone. These should not be seen as a stain, but just a characteristic of the stone – and no amount of cleaning will get these marks out.

We would normally seal a light-coloured stone like this with Tile Doctor Ultra-Seal, as this no-sheen product helps to retain the natural patina of the stone. Alternatively, if we wanted to darken the tone of the Limestone, we would apply Tile Doctor Colour Grow, which is a colour-intensifying, impregnating sealer. Two coats of either sealer would suffice, in this case despite being very pleased with the results of the cleaning, the customer decided that he wanted to take care of sealing of the stone himself.

Floor Damaged Limestone Fireplace Hearth After Cleaning Floor Damaged Limestone Fireplace Hearth After Cleaning

 

Water Stained Limestone Fireplace Hearth Restoration in Morecambe

Limestone Fireplace Hearths Stained by Flooding Rejuvenated in Morecambe Read More »

Sandstone Fireplace Preston Before and After Cleaning

Cleaning a Sandstone Fireplace and Victorian Floor Tiles Preston

1 Comment / Fireplace Cleaning, Preston Tile Cleaning, Sandstone Tile Cleaning, Work History /

We often get asked to do a combination of jobs at Tile Doctor so we have to be prepared for the unexpected, like getting asked to clean an old Sandstone fireplace whilst your cleaning a Victorian tiled floor at a house in Preston. We normally charge extra for these types of jobs but it depends how much cleaning is required.

Red and Black Victorian Tiles Preston Before Cleaning
This Fireplace had been in use for a number of years and due to its grainy texture was hard to keep clean, dirt and soot had built up on its surface and there was no sealer visible, either that or it had worn off with the heat.

Sandstone Fireplace Preston Before Cleaning

Cleaning and Sealing a Sandstone Fireplace

To clean the uprights and Hearth I applied Tile Doctor Oxy-Gel which being in Gel form and not a liquid, stays in place increasing dwell times and doesn’t drip where it shouldn’t. In this case I let it soak into the stone for about forty minutes before scrubbing it in with a stiff hand brush and steam. Some marks were still visible after this process so we opted for using handheld Diamond blocks in 50.100.200 and then 400 grit to grind off the staining and restore the surface finish. Using these small handheld blocks takes off some of the heavier texture as well as cleaning the stone at the same time, but is really useful to use where chemicals alone struggle to get the results required. Once fully clean the fireplace was rinsed with water a couple of times and the slurry removed using a wet vacuum. After speed drying the stone with a heat gun it was ready for a couple of coats of Tile Doctor Colour Grow, even we were impressed with the results.

Sandstone Fireplace Preston After Cleaning

Cleaning and Sealing a Victorian Tiled Floor

The Red and Black Victorian Tiles were cleaned with a strong dilution of Tile Doctor Pro-Clean which is very similar to Oxy-Gel only in a liquid form. The product was left to soak into the tiles for about ten minutes before being scrubbed in with a black buffing pad attached to a slow speed buffing machine. I used the wet vacuum again to soak up the residue and stubborn stains were retreated until I was satisfied.

Old Victorian floors rarely have a damp proof membrane installed and so it’s not uncommon for damp to rise-up through the ground and tile resulting in white salt deposits being left on the surface. To prevent this process, which is commonly referred to as Efflorescence, Tile Doctor Acid Gel was applied. The solution is scrubbed into the tiles and then rinsed off with clean water and removed with a wet vacuum ready for sealing.

Victorian Tiles can take a while to dry and in this case I left it two days before returning to apply a breathable sealer to protect the tiles from ingrained dirt and staining. In this case a couple of coats of Tile Doctor Colour Grow were applied. If you recall this was the same sealer we used on the fireplace as the customer wished to bring out the colour and have a Matt finish.

Red and Black Victorian Tiles Preston After Cleaning
 

Professional Restoration of a Sandstone Fireplace and Victorian Floor in Lancashire

Cleaning a Sandstone Fireplace and Victorian Floor Tiles Preston Read More »

=================================

Bamber Bridge Tile Cleaning, Bentham Tile Cleaning, Blackpool Tile Cleaning, Ceramic Tile Cleaning, Encaustic Cement Tile Cleaning, Fireplace Cleaning, Flagstone Tile Cleaning, Fulwood Tile Cleaning, Garstang Tile Cleaning, Grout Cleaning, Heysham Tile Cleaning, Lancaster Tile Cleaning, Leyland Tile Cleaning, Limestone Tile Cleaning and Polishing, Lytham St Annes Tile Cleaning, Marble Tile Cleaning, Morecambe Tile Cleaning, Porcelain Tile Cleaning, Poulton-le-Fylde Tile Cleaning, Preston Tile Cleaning, Quarry Tile Cleaning, Sandstone Tile Cleaning, Slate Tile Cleaning, Terracotta Tile Cleaning, Terrazzo Floor Cleaning, Thornton-Cleveleys Tile Cleaning, Travertine Tile Cleaning, Ulverston Tile Cleaning, Victorian Tile Cleaning, Vinyl Tile Cleaning, Work by Category, Work by Location, Work History /

Lancashire Tile Doctor

================================= Read More »

╳
Scroll to Top